Beelink SER8 vs Minisforum UM890 Pro
These two get cross-shopped constantly because they are nearly the same computer: an 8-core Zen 4 AMD chip with a Radeon 780M, two DDR5 slots, and M.2 storage. The Ryzen 9 8945HS in the UM890 Pro and the Ryzen 7 8845HS in the SER8 are the same silicon clocked about 100 MHz apart, so performance is a wash. What splits them is the chassis. The SER8 is the quieter, lower-power, usually cheaper box with a single 2.5-gigabit port. The UM890 Pro adds a second 2.5GbE NIC, an OCuLink port, a second USB4 port, and room for 96GB of RAM. Buy the SER8 unless you specifically need that extra I/O.
Updated 2026-11-09 · by Jonathan Caruso
This page has affiliate links, so HomelabCompass may earn a commission at no cost to you. As an Amazon Associate, HomelabCompass earns from qualifying purchases. It never changes a verdict. How the site is funded
Side by side
| Beelink SER8 | Minisforum UM890 Pro | |
|---|---|---|
| CPU | Ryzen 7 8845HS (8c/16t, up to 5.1GHz, Zen 4) | Ryzen 9 8945HS (8c/16t, up to 5.2GHz, Zen 4) |
| iGPU | Radeon 780M (12 CU, RDNA 3) | Radeon 780M (12 CU, RDNA 3) |
| Max RAM | 64GB DDR5-5600 (2x SODIMM) | 96GB DDR5-5600 (2x SODIMM) |
| Storage | 2x M.2 2280 PCIe 4.0 | 2x M.2 2280 PCIe 4.0 (one shared with OCuLink) |
| Networking | 1x 2.5GbE (Realtek) | 2x 2.5GbE |
| External expansion | 1x USB4 40Gbps (eGPU over USB) | 2x USB4 40Gbps + OCuLink (PCIe 4.0 x4) |
| Cooling / power | Mac-mini-style, quiet; 54W default (65W via BIOS) | Larger, louder under load; 8945HS tuned higher |
| Street price | About $500 to $590 (8845HS, 32GB/1TB) | About $450 barebone; $550 to $650 configured |
Same chip, different box
Do not read the Ryzen 9 versus Ryzen 7 badges as a tier gap. The 8945HS and the 8845HS are both Hawk Point parts: eight Zen 4 cores, sixteen threads, the same Radeon 780M integrated graphics with twelve RDNA 3 compute units, and the same 16-TOPS NPU. The 8945HS boosts to 5.2GHz against the 8845HS at 5.1GHz, and Minisforum runs it at a higher sustained wattage, so the UM890 Pro posts a few percent higher in a benchmark. In day-to-day homelab use (containers, a couple of VMs, a reverse proxy, a media library) you will not feel it.
So the CPU is a tie, and the iGPU is identical. Neither chip has Intel Quick Sync, which is the transcoder most Plex guides assume. The 780M handles H.264, HEVC, and AV1 decode and encode through AMD's VCN block, and it works with Jellyfin and Plex, but if hardware transcoding is the whole reason you are buying, a used Intel box with Quick Sync is still the safer pick. Decide what the box is for before you let a 100 MHz clock difference choose it.
Networking is the real split
This is the line that should decide most buyers. The UM890 Pro has two 2.5-gigabit Ethernet ports. The SER8 has one. For a single always-on box running Docker or a handful of VMs, one NIC is plenty and the SER8 is the cheaper way to get there. The moment you want to put a firewall, a management network, or VLAN-separated traffic on the same box, the second port stops being a luxury.
A dual-NIC mini PC is a real pfSense or OPNsense candidate: WAN on one port, LAN on the other, no VLAN trunk required. It is also how you give a Proxmox node a dedicated storage or cluster network separate from guest traffic, or run a link-aggregation group to a managed switch. One caveat on the UM890 Pro: its NICs are the usual consumer chips, and FreeBSD-based firewalls (pfSense, OPNsense) are happiest on Intel NICs, so test before you commit it to router duty. Plan the addressing in the subnet calculator either way.
The SER8 is not locked out of multi-network setups, it just needs help: a USB4 or USB 2.5GbE adapter adds a second interface. That works, but a USB NIC is one more thing to come loose or drop, and it is not where you want your gateway living. If dual networking is on the roadmap, buy the ports in the box.
Expansion: OCuLink, USB4, and the RAM ceiling
The UM890 Pro's headline feature is OCuLink, a PCIe 4.0 x4 port that gives you a real external link for a graphics card or an NVMe enclosure, far more bandwidth than USB4's 40 gigabits once you account for protocol overhead. If you want to bolt a desktop GPU onto a tiny box for local AI, OCuLink is the clean way to do it. The SER8 can also drive an external GPU, but only over USB4, which works and is slower. Run the numbers on what a GPU adds to the wall in the power and running-cost calculator before you commit to an eGPU homelab.
There is a catch worth knowing: Minisforum routes the OCuLink through one of the two M.2 slots, so you cannot run an OCuLink device and fill both NVMe slots at the same time. For most people that is fine (one fast NVMe plus OCuLink is a sensible layout), but if you planned on two internal drives and an external GPU, the UM890 Pro cannot do all three at once.
RAM is the other gap. The SER8 tops out at 64GB, the UM890 Pro at 96GB, both across two DDR5-5600 SODIMM slots. Ninety-six gigabytes (two 48GB sticks) is a lot of headroom for VMs on a box this size and is the kind of thing that matters if you are consolidating several services onto one node. If 64GB covers your plans, this gap is theoretical. The UM890 Pro also gives you a second USB4 port, handy for a Thunderbolt-style dock or a second high-speed peripheral.
Noise, heat, and idle power
The SER8 is built around being quiet. Beelink borrowed the Mac-mini footprint and a cooling design that stays near silent at idle and only gets audible under a sustained all-core load, and it ships at a 54-watt default power limit (you can unlock 65 watts in the BIOS). For a box that sits on a desk or a shelf in a room you actually use, that matters.
The UM890 Pro is the louder of the two. It is a larger chassis, Minisforum tunes the 8945HS to a higher sustained wattage, and the fan spins up more under load. It is not loud for a computer, but next to the SER8 it is the one you would notice in a quiet room. If the box lives in a closet or a rack cubby, this is a non-issue; if it lives where you sleep or work, it counts.
Idle power on both lands in the single-digit-to-low-teens watts range typical of these AMD APUs, which is cheap to run around the clock. The difference under load is a few watts, not a few hundred, so electricity cost is not the deciding factor here. Noise and the NIC count are.
Running a homelab on either
Both run Proxmox without drama: modern AMD cores with virtualization extensions, enough RAM for a real stack of LXC containers and a few VMs, and NVMe for fast guest storage. A single node of either will happily carry Home Assistant, a reverse proxy, a database, Pi-hole, and a media server. Three identical units make a genuine cluster for high-availability practice, and here the SER8's lower price and quieter cooling make it the easier box to buy in threes.
Storage is the ceiling on both. Two M.2 slots is good for the operating system, containers, and a photo library, but these are compute boxes, not bulk storage. For a movie collection or a backup target, pair the mini PC with a NAS and pick its software from the best NAS OS roundup, or build a dedicated box. If you are weighing these against other options, the best mini PC for a home server guide covers the used-enterprise and Strix Halo alternatives that might fit better depending on your budget and whether you want 10-gigabit networking.
Where Beelink SER8 wins
- Quieter, near-silent at idle, with a 54W default power limit.
- Usually cheaper for the same 8-core Zen 4 chip and Radeon 780M.
- Two M.2 2280 slots and two DDR5 slots, same as the Minisforum.
- Compact Mac-mini footprint that disappears on a desk.
Where Minisforum UM890 Pro wins
- Two 2.5GbE ports: real firewall, VLAN, and cluster-network options.
- OCuLink (PCIe 4.0 x4) for a fast external GPU or NVMe enclosure.
- Up to 96GB of RAM versus 64GB, and a second USB4 port.
- Often sold barebone, the cheapest way in if you bring your own RAM and SSD.
Which to pick, by situation
| Your situation | Pick | Why |
|---|---|---|
| One quiet always-on box on a desk or shelf | Beelink SER8 | Near-silent cooling, 54W default, and usually cheaper for the same 8 cores. |
| Proxmox node with VLAN or storage-network separation | Minisforum UM890 Pro | The second 2.5GbE port keeps guest, management, and storage traffic apart without a trunk. |
| eGPU for local AI or an external NVMe enclosure | Minisforum UM890 Pro | OCuLink is a full PCIe 4.0 x4 link, much faster than the SER8's USB4-only path. |
| Cheapest capable 8-core box, one NIC is fine | Beelink SER8 | Same chip and iGPU, lower price, and nothing you will not use. |
| Firewall or router duty (pfSense/OPNsense) | Minisforum UM890 Pro | Two ports out of the box, though test the consumer NICs on FreeBSD first. |
The verdict
For most people buying one mini PC, the Beelink SER8 is the better purchase: it runs the same 8-core Zen 4 chip and the same Radeon 780M as the UM890 Pro, but quieter, at lower default power, and usually for less money. The Ryzen 9 badge on the Minisforum buys you a few percent you will not notice. Buy the UM890 Pro when you need what its chassis adds and not before: a second 2.5GbE port for a firewall or VLAN-separated Proxmox node, OCuLink for a fast external GPU or NVMe enclosure, or 96GB of RAM to stack VMs. Match the box to the networking and expansion you actually need, and the choice makes itself.
Choose Beelink SER8 if you want one quiet, low-power box that does the same 8-core work for less, and a single 2.5GbE port is enough.
Choose Minisforum UM890 Pro if you need the extra I/O: dual 2.5GbE for a firewall or separated networks, OCuLink for an eGPU or external NVMe, or 96GB of RAM.
What to buy
What fits the advice above. Amazon links open a search, so you can compare current models and prices.
Beelink SER8
The quieter, lower-power pick: an 8-core Ryzen 7 8845HS and Radeon 780M at a 54W default, usually cheaper, with a single 2.5GbE port.
See it on AmazonMinisforum UM890 Pro
The expansion pick: same class of chip plus a second 2.5GbE port, OCuLink for an external GPU, and room for 96GB of RAM. Often sold barebone.
See it on AmazonDDR5-5600 SODIMM kit
Both take two SODIMMs. Grab a 2x16 or 2x32 DDR5-5600 kit if you buy a barebone unit or want to max the RAM.
See it on Amazon
Official links
Beelink SER8
Minisforum UM890 Pro
FAQ
Which is better, Minisforum or Beelink?
Neither wins outright; they target different buyers. The Minisforum UM890 Pro is the pick when you need its I/O: dual 2.5GbE for firewall or VLAN work, OCuLink for an external GPU, or 96GB of RAM. The Beelink SER8 is the better buy for one quiet, low-power box, because it runs the same 8-core chip for less and with less noise. Decide on networking and expansion first, then the choice is obvious.
Is the Minisforum UM890 Pro good for a homelab?
Yes, and the dual 2.5GbE port plus OCuLink are exactly the features a homelab leans on. It runs Proxmox cleanly, gives you a second NIC for separated networks or a FreeBSD firewall, and takes up to 96GB of RAM for stacking VMs. The main homelab caveat is that OCuLink shares a lane with one M.2 slot, so you cannot run two internal NVMe drives and an external GPU at once.
How much RAM can each one take?
The Beelink SER8 officially supports up to 64GB and the Minisforum UM890 Pro up to 96GB, both across two DDR5-5600 SODIMM slots. For most single-node homelabs 64GB is plenty; the 96GB ceiling matters mainly if you are consolidating several memory-hungry VMs onto one box.
Do these have Intel Quick Sync for Plex transcoding?
No. Both use AMD chips, so there is no Quick Sync. The Radeon 780M handles H.264, HEVC, and AV1 through AMD's VCN block and works with Jellyfin and Plex, but if hardware transcoding is your main goal a used Intel box with Quick Sync is the more reliable choice. See the [Jellyfin vs Plex](/compare/jellyfin-vs-plex) comparison for how transcoding support differs.
Can the UM890 Pro use an external GPU?
Yes, over OCuLink, which is a PCIe 4.0 x4 link and much faster than driving a GPU over USB4. That makes it a cleaner base for a local-AI box than the SER8, which can only attach an eGPU over USB4. Factor the GPU's extra draw into your power budget before committing.
Does the Beelink SER8 have speakers?
Yes, it has a small built-in speaker, which is useful if you ever use it as a desktop. For a headless homelab server it is irrelevant; you will run it over SSH or a web UI with no display or audio attached.
Is Beelink a Chinese company?
Yes. Both Beelink and Minisforum are Shenzhen-based mini PC makers, as are most brands in this segment (GEEKOM, GMKtec, and others). Both have solid reputations in the homelab community. The practical thing to check is BIOS and driver update cadence, where both are reasonable but not on an enterprise schedule.
Can you run pfSense or OPNsense on them?
The UM890 Pro is the better fit because it has two 2.5GbE ports, so WAN and LAN each get a physical interface. The SER8 has one port and would need a USB or OCuLink NIC for a second interface. On either, note that pfSense and OPNsense (FreeBSD) run most smoothly on Intel NICs, and these boxes ship with consumer chips, so test a live USB before you make one your gateway.