Home Server / Hardware

Best Mini PC With a PCIe Slot

Almost every mini PC has zero expansion: one or two M.2 slots and that is it. The handful that give you a real, full PCIe slot is a short list, and for most homelabs the Minisforum MS-01 is the one to buy. It has an Intel Core i5 or i9, dual 10GbE SFP+ plus dual 2.5GbE, and a PCIe 4.0 slot (x16 physical, x8 electrical) that happily takes an HBA, a 10-gigabit card, or a low-profile GPU. Want more CPU and AMD? The newer MS-A2 drops in a 16-core Ryzen 9 with the same slot. Want it cheap? A used small-form-factor enterprise desktop off eBay has a low-profile slot for about $150, as long as you only need half-height cards.

Updated 2026-11-19 · by

This page has affiliate links, so HomelabCompass may earn a commission at no cost to you. As an Amazon Associate, HomelabCompass earns from qualifying purchases. It never changes a verdict. How the site is funded

Top pick

Minisforum MS-01

The MS-01 is the box most homelabbers already run when they need a slot, and that track record matters. You get an Intel Core i5-12600H, i9-12900H, or i9-13900H, dual 10GbE SFP+ and dual 2.5GbE on Intel i226, three M.2 slots, up to 96GB of DDR5, and a PCIe 4.0 slot that is x16 physically and x8 electrically. That x8 is plenty for an LSI HBA feeding a disk shelf or a single-slot GPU for transcoding or small LLM work, and the dual 10GbE means you often do not even need the slot for networking. It starts around $600 barebones, which is a lot of expandable machine in a one-liter-and-change chassis.

The options

Minisforum MS-01

New, about $600 barebones and up

A workstation-class mini with server networking and a real expansion slot. The default pick.

Visit Minisforum MS-01 site
Runs on
Intel Core i5-12600H / i9-12900H / i9-13900H, dual 10GbE SFP+ plus dual 2.5GbE, a PCIe 4.0 x16 slot (x8 electrical), three M.2 slots (one takes U.2), up to 96GB DDR5
Pick it if
You want a proven box for a Proxmox node: 10-gig networking out of the box and a slot free for an HBA or a low-profile GPU.

Minisforum MS-A2

New, about $440 barebones to $900 configured

The newer AMD sibling of the MS-01, with far more CPU for the same money.

Visit Minisforum MS-A2 site
Runs on
AMD Ryzen 9 9955HX (16 cores, Zen 5) or 7945HX, dual 10GbE SFP+ plus 2.5GbE, a PCIe 4.0 x16 slot (x8 electrical, can split to two x4), up to 96GB DDR5, two M.2 plus a U.2
Pick it if
You want the most cores you can get in this form factor for a stack of VMs, and you prefer AMD. Reviewers call it the MS-01 killer.

Minisforum MS-S1 Max

New, workstation pricing (well above the MS-01)

A Strix Halo box with a huge iGPU, 128GB of unified memory, and a slot. Built for local AI.

Visit Minisforum MS-S1 Max site
Runs on
AMD Ryzen AI Max+ 395 (40-CU iGPU), up to 128GB soldered LPDDR5X, dual 10GbE, a PCIe x16 slot, internal power supply
Pick it if
You run local models and want room to add a NIC or HBA. See the [best Strix Halo mini PC](/alternatives/best-strix-halo-mini-pc) roundup for the full AI-box comparison.

Used SFF desktop (Lenovo/Dell/HP)

Used or renewed, roughly $100 to $250

A used small-form-factor business desktop, not the one-liter Tiny or Micro. The ~7-liter SFF chassis is the one with a slot.

Runs on
8th to 10th gen Intel with Quick Sync, one low-profile (half-height) PCIe x16 slot plus often a second x1 slot, 32-64GB RAM, M.2 plus a 3.5-inch bay
Pick it if
You want expansion on a budget and only need half-height cards: a low-profile 10GbE NIC, an LSI HBA, or a sub-75-watt GPU.

All-in-one N100/N305 NAS board (CWWK, Topton)

New board, about $150 to $280 plus a case and RAM

A DIY route: a mini-ITX NAS board with the CPU soldered on and a slot, in a small case.

Visit All-in-one N100/N305 NAS board (CWWK, Topton) site
Runs on
Intel N100 or i3-N305, six SATA and dual or quad 2.5GbE onboard, a PCIe x16-size slot usually wired x1 or x4, no ECC, roughly 10-15W idle
Pick it if
You want the lowest power and a slot for an HBA or an Intel NIC, and you are fine building it yourself. See the [best NAS motherboard](/alternatives/best-nas-motherboard) guide.

How to choose

Decide what goes in the slot first, then pick the box. A 10-gigabit NIC or an LSI HBA (a 9300-8i in IT mode) needs only four to eight electrical lanes, so the x8 slot on an MS-01 or MS-A2 runs them at full speed with headroom to spare. A GPU is where it gets picky: an x8 link costs a modern card almost nothing in real workloads, but the card still has to physically fit and get power. The MS-01 and MS-A2 take a single-slot, low-profile GPU; a full-length, full-height card means one of the larger Minisforum workstation boxes or honestly just a full tower. If the slot is for storage or networking on a Proxmox node, any box on this list does the job.

Watch the difference between a real PCIe slot and Mini PCIe or M.2. A lot of listings say a mini PC supports PCIe when they mean an internal M.2 or a legacy Mini PCIe connector, which is fine for a Wi-Fi card or a single NVMe drive but will not take a standard expansion card. Mini PCIe is a small, older laptop-era slot; M.2 is the modern small slot; a full PCIe slot is the long edge connector a desktop card plugs into. Only the full slot lets you add an HBA, a discrete NIC, or a GPU, so confirm the exact connector before you buy, not just the word PCIe. Watch the electrical lanes too: a physical x16 slot wired x8 or x4 is common and usually fine, but the N100 NAS boards often wire their slot at a single x1 lane, which throttles a 10-gigabit card.

Then size the power and the card height. The Minisforum boxes have the headroom and cooling for a slot-powered card and the MS-01 handles a low-profile GPU with its own fan. A used SFF desktop is the opposite: its 180 to 260-watt power supply and half-height slot cap you at a low-profile, slot-powered (75-watt) GPU, which rules out anything with a six-pin connector. The N100 boards sip ten to fifteen watts and leave plenty of power budget, but their slot is for an HBA or a NIC, not a graphics card. Run your planned parts through the power and running-cost calculator before you commit, and if the slot is going to feed a disk array, size the pool in the RAID and ZFS calculator first.

The verdict

Buy the Minisforum MS-01 for most homelabs that need a slot. You get dual 10GbE SFP+, three M.2 slots, and a PCIe 4.0 x8 slot free for an HBA or a low-profile GPU, in a box that runs around $600 barebones and that a lot of people already trust. Get the MS-A2 instead if you want more CPU and AMD; it is the same idea with a 16-core Ryzen 9 and often a better deal. Go with the MS-S1 Max only if local AI is the point and you want a slot on the side, covered in the best Strix Halo mini PC roundup. If budget rules, hunt a used small-form-factor enterprise desktop and accept low-profile cards only. And if you only ever wanted the slot for a GPU or many drives, be honest about it: a full-size home server or tower is cheaper and easier than fighting a mini PC's power and clearance limits. Price the 24/7 running cost in the power calculator before you leave any of them on around the clock.

What to buy

What fits the advice above. Amazon links open a search, so you can compare current models and prices.

  • Minisforum MS-01

    The proven PCIe-slot mini PC: dual 10GbE SFP+, three M.2 slots, and a PCIe 4.0 x8 slot free for an HBA or a low-profile GPU. Often sold barebone.

    See it on Amazon
  • Minisforum MS-A2

    The AMD pick with more cores: a 16-core Ryzen 9, the same dual 10GbE and PCIe x8 slot, usually a better deal than the MS-01 for CPU-heavy work.

    See it on Amazon
  • Used SFF desktop (Lenovo/Dell/HP)

    The budget slot: a small-form-factor OptiPlex, ThinkCentre, or ProDesk (not the one-liter Micro) has a low-profile PCIe slot for a NIC, an HBA, or a sub-75-watt card.

    See it on Amazon

FAQ

Which mini PCs have a PCIe slot?

The short list most people land on: the Minisforum MS-01 (Intel) and MS-A2 (AMD), which have a PCIe 4.0 x16 slot wired at x8, and the MS-S1 Max for local AI. Below those, a used small-form-factor business desktop (Lenovo ThinkCentre SFF, Dell OptiPlex SFF, HP ProDesk SFF) has a low-profile slot for around $150, and all-in-one N100 or N305 NAS boards from CWWK and Topton include a slot, usually wired x1 or x4. The one-liter Tiny, Micro, and most Beelink and GEEKOM boxes have no full slot, only M.2.

Can you add a graphics card to a mini PC?

Only to a mini PC that has a real, full-length PCIe slot and the power and clearance for the card. The MS-01 and MS-A2 take a single-slot, low-profile GPU. A used SFF desktop takes a half-height, slot-powered card under about 75 watts. No one-liter mini PC with only M.2 can take a GPU internally; for those, an eGPU over OCuLink or Thunderbolt is the only route, and it is slower and fiddlier than a real slot.

Can you add a PCIe card to a mini PC? Is a mini PC upgradeable?

If it has a full PCIe slot, yes: an HBA, a 10-gigabit NIC, or a low-profile GPU all drop in. RAM and storage are usually upgradeable on these boxes too (SO-DIMM slots and M.2), with the exception of the Strix Halo units, whose memory is soldered. The one-liter minis are the least upgradeable: you can swap RAM and the NVMe drive but you cannot add a card.

What is the difference between PCI Express and Mini PCIe?

PCI Express (PCIe) is the standard long slot a desktop expansion card plugs into, and it comes in x1, x4, x8, and x16 physical sizes. Mini PCIe is a small, older connector from the laptop era, used for things like Wi-Fi cards, and it is not the same slot: a standard PCIe card will not fit it. M.2 is the modern replacement for Mini PCIe. When a mini PC lists a PCIe slot, confirm it means the full-size connector, not Mini PCIe or M.2, or you cannot add a real expansion card.

Does the MS-01 slot run at the full x16?

No. The slot is x16 physically but wired x8 electrically on both the MS-01 and the MS-A2. In practice that does not matter for a NIC, an HBA, or a single GPU: PCIe 4.0 x8 has the same bandwidth as PCIe 3.0 x16, and real workloads lose almost nothing. The MS-A2 can also split its slot into two x4 links if you want two cards on a riser.

What is the downside of a mini PC with a slot?

Three things. You pay more than for a slotless mini: an MS-01 starts around $600 barebones. Card choice is limited by physical space and power, so most of these take low-profile or single-slot cards only, not a full-size GPU. And they still hold very few drives internally, so if the slot is feeding an HBA you need an external disk shelf or a separate NAS for the disks themselves.

Do used SFF desktops have a PCIe slot?

Yes, and that is the key point: the small-form-factor (SFF) models do, the Tiny, Micro, and Mini one-liter models do not. A Dell OptiPlex 7070 SFF, Lenovo ThinkCentre M720s, or HP ProDesk 600 SFF has a low-profile x16 slot and often a second x1 slot, takes an Intel CPU with Quick Sync and 32 to 64GB of RAM, and sells used for $100 to $250. The limits are height (half-height cards only) and a small power supply, so no big GPU.

Can I use the slot for 10-gigabit networking instead?

Yes, and on a box that does not already have 10GbE it is the best use of the slot. A used Intel X520 or X540 card, or a newer X710, drops into the slot and gives you SFP+ or 10GBASE-T. On the MS-01, MS-A2, and MS-S1 Max you usually do not need to, since they ship with dual 10GbE SFP+ already, which frees the slot for an HBA or a GPU.

Related on HomelabCompass

← All self-hosted alternatives